SubnetPad

IPv6 /106 Subnet Calculator

Results update as you type

A /106 provides 2²² addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

/0
/128

/106 = 2²² addresses (≈ 4.19 × 10⁶)

Results for 2001:db8:abcd:12::/106

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /106
Total addresses≈ 4.19 × 10⁶ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /106 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /106

IPv6 /106 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (106)Split hextetHost bits (22)
Network bits
106
Host bits
22
Prefix mask
ffff:ffff:ffff:ffff:ffff:ffff:ffc0:0
Total addresses
2²²
Approx. count
4.19 × 10⁶
/64 subnets
Addresses formula
2^22
/64 relationship
smaller than a /64

Overview

A /106 provides 2²² addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

Common use cases

  • Constrained management or out-of-band segments
  • Lab networks with a fixed address budget
  • Documentation of smaller-than-/64 designs

Key facts

  • A /106 fixes 106 network bits and leaves 22 host bits — 2²² total addresses.
  • In network design terms, /106 is typically a constrained management or lab segment.
  • A /106 is 1/2⁴² of a standard /64 LAN subnet.

Design guidance

A /106 can work for small management VLANs, out-of-band networks, or certification lab exercises where you deliberately cap the host count. For router interconnects, prefer /127 (RFC 6164) over /106. For ordinary LANs, stay with /64 regardless of how small the segment feels.

Practical example

In a lab, 2001:db8:abcd:0012::1/106 might number a small segment with 2²² addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /106 into…

PrefixSubnetsAddresses each
/10722²¹
/10842²⁰
/110162¹⁸
/11425616,384

/106 fits inside…

SupernetAddresses/106s inside
/1052²³2
/1042²⁴4
/1022²⁶16
/982³⁰256

Frequently asked questions

Common questions about IPv6 /106 blocks, prefix sizes, and use cases.