SubnetPad

IPv6 /107 Subnet Calculator

Results update as you type

A /107 provides 2²¹ addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

/0
/128

/107 = 2²¹ addresses (≈ 2.10 × 10⁶)

Results for 2001:db8:abcd:12::/107

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /107
Total addresses≈ 2.10 × 10⁶ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /107 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /107

IPv6 /107 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (107)Split hextetHost bits (21)
Network bits
107
Host bits
21
Prefix mask
ffff:ffff:ffff:ffff:ffff:ffff:ffe0:0
Total addresses
2²¹
Approx. count
2.10 × 10⁶
/64 subnets
Addresses formula
2^21
/64 relationship
smaller than a /64

Overview

A /107 provides 2²¹ addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

Common use cases

  • Constrained management or out-of-band segments
  • Lab networks with a fixed address budget
  • Documentation of smaller-than-/64 designs

Key facts

  • A /107 fixes 107 network bits and leaves 21 host bits — 2²¹ total addresses.
  • In network design terms, /107 is typically a constrained management or lab segment.
  • A /107 is 1/2⁴³ of a standard /64 LAN subnet.

Design guidance

A /107 can work for small management VLANs, out-of-band networks, or certification lab exercises where you deliberately cap the host count. For router interconnects, prefer /127 (RFC 6164) over /107. For ordinary LANs, stay with /64 regardless of how small the segment feels.

Practical example

In a lab, 2001:db8:abcd:0012::1/107 might number a small segment with 2²¹ addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /107 into…

PrefixSubnetsAddresses each
/10822²⁰
/10942¹⁹
/111162¹⁷
/1152568,192

/107 fits inside…

SupernetAddresses/107s inside
/1062²²2
/1052²³4
/1032²⁵16
/992²⁹256

Frequently asked questions

Common questions about IPv6 /107 blocks, prefix sizes, and use cases.