SubnetPad

IPv6 /104 Subnet Calculator

Results update as you type

A /104 provides 2²⁴ addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

/0
/128

/104 = 2²⁴ addresses (≈ 1.68 × 10⁷)

Results for 2001:db8:abcd:12::/104

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /104
Total addresses≈ 1.68 × 10⁷ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /104 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /104

IPv6 /104 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (104)Split hextetHost bits (24)
Network bits
104
Host bits
24
Prefix mask
ffff:ffff:ffff:ffff:ffff:ffff:ff00:0
Total addresses
2²⁴
Approx. count
1.68 × 10⁷
/64 subnets
Addresses formula
2^24
/64 relationship
smaller than a /64

Overview

A /104 provides 2²⁴ addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

Common use cases

  • Constrained management or out-of-band segments
  • Lab networks with a fixed address budget
  • Documentation of smaller-than-/64 designs

Key facts

  • A /104 fixes 104 network bits and leaves 24 host bits — 2²⁴ total addresses.
  • In network design terms, /104 is typically a constrained management or lab segment.
  • A /104 is 1/2⁴⁰ of a standard /64 LAN subnet.

Design guidance

A /104 can work for small management VLANs, out-of-band networks, or certification lab exercises where you deliberately cap the host count. For router interconnects, prefer /127 (RFC 6164) over /104. For ordinary LANs, stay with /64 regardless of how small the segment feels.

Practical example

In a lab, 2001:db8:abcd:0012::1/104 might number a small segment with 2²⁴ addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /104 into…

PrefixSubnetsAddresses each
/10522²³
/10642²²
/108162²⁰
/11225665,536

/104 fits inside…

SupernetAddresses/104s inside
/1032²⁵2
/1022²⁶4
/1002²⁸16
/962³²256

Frequently asked questions

Common questions about IPv6 /104 blocks, prefix sizes, and use cases.