SubnetPad

IPv6 /102 Subnet Calculator

Results update as you type

A /102 provides 2²⁶ addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

/0
/128

/102 = 2²⁶ addresses (≈ 6.71 × 10⁷)

Results for 2001:db8:abcd:12::/102

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /102
Total addresses≈ 6.71 × 10⁷ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /102 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /102

IPv6 /102 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (102)Split hextetHost bits (26)
Network bits
102
Host bits
26
Prefix mask
ffff:ffff:ffff:ffff:ffff:ffff:fc00:0
Total addresses
2²⁶
Approx. count
6.71 × 10⁷
/64 subnets
Addresses formula
2^26
/64 relationship
smaller than a /64

Overview

A /102 provides 2²⁶ addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

Common use cases

  • Constrained management or out-of-band segments
  • Lab networks with a fixed address budget
  • Documentation of smaller-than-/64 designs

Key facts

  • A /102 fixes 102 network bits and leaves 26 host bits — 2²⁶ total addresses.
  • In network design terms, /102 is typically a constrained management or lab segment.
  • A /102 is 1/2³⁸ of a standard /64 LAN subnet.

Design guidance

A /102 can work for small management VLANs, out-of-band networks, or certification lab exercises where you deliberately cap the host count. For router interconnects, prefer /127 (RFC 6164) over /102. For ordinary LANs, stay with /64 regardless of how small the segment feels.

Practical example

In a lab, 2001:db8:abcd:0012::1/102 might number a small segment with 2²⁶ addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /102 into…

PrefixSubnetsAddresses each
/10322²⁵
/10442²⁴
/106162²²
/1102562¹⁸

/102 fits inside…

SupernetAddresses/102s inside
/1012²⁷2
/1002²⁸4
/982³⁰16
/942³⁴256

Frequently asked questions

Common questions about IPv6 /102 blocks, prefix sizes, and use cases.