SubnetPad

IPv6 /110 Subnet Calculator

Results update as you type

A /110 provides 2¹⁸ addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

/0
/128

/110 = 2¹⁸ addresses (≈ 2.62 × 10⁵)

Results for 2001:db8:abcd:12::/110

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /110
Total addresses≈ 2.62 × 10⁵ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /110 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /110

IPv6 /110 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (110)Split hextetHost bits (18)
Network bits
110
Host bits
18
Prefix mask
ffff:ffff:ffff:ffff:ffff:ffff:fffc:0
Total addresses
2¹⁸
Approx. count
2.62 × 10⁵
/64 subnets
Addresses formula
2^18
/64 relationship
smaller than a /64

Overview

A /110 provides 2¹⁸ addresses — a tightly scoped segment much smaller than a /64. It is occasionally used for management networks or lab exercises where a full /64 is unnecessary.

Common use cases

  • Constrained management or out-of-band segments
  • Lab networks with a fixed address budget
  • Documentation of smaller-than-/64 designs

Key facts

  • A /110 fixes 110 network bits and leaves 18 host bits — 2¹⁸ total addresses.
  • In network design terms, /110 is typically a constrained management or lab segment.
  • Written out, /110 holds exactly 262,144 addresses.
  • A /110 is 1/2⁴⁶ of a standard /64 LAN subnet.

Design guidance

A /110 can work for small management VLANs, out-of-band networks, or certification lab exercises where you deliberately cap the host count. For router interconnects, prefer /127 (RFC 6164) over /110. For ordinary LANs, stay with /64 regardless of how small the segment feels.

Practical example

In a lab, 2001:db8:abcd:0012::1/110 might number a small segment with 262,144 addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /110 into…

PrefixSubnetsAddresses each
/11122¹⁷
/112465,536
/1141616,384
/1182561,024

/110 fits inside…

SupernetAddresses/110s inside
/1092¹⁹2
/1082²⁰4
/1062²²16
/1022²⁶256

Frequently asked questions

Common questions about IPv6 /110 blocks, prefix sizes, and use cases.