SubnetPad

IPv6 /60 Subnet Calculator

Results update as you type

A /60 provides exactly 16 /64 subnets (2⁶⁸ addresses). Some ISPs delegate a /60 to home users as a smaller alternative to a /56. It is the smallest delegation that still lets you run several separate /64 LANs.

/0
/128

/60 = 2⁶⁸ addresses (≈ 2.95 × 10²⁰)

Results for 2001:db8:abcd:10::/60

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /60
Total addresses≈ 2.95 × 10²⁰ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /60 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000000
NetworkSplit groupHost

Quick facts for IPv6 /60

IPv6 /60 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (60)Split hextetHost bits (68)
Network bits
60
Host bits
68
Prefix mask
ffff:ffff:ffff:fff0::
Total addresses
2⁶⁸
Approx. count
2.95 × 10²⁰
/64 subnets
2⁴
Addresses formula
2^68
/64 relationship
2⁴ × /64 subnets

Overview

A /60 provides exactly 16 /64 subnets (2⁶⁸ addresses). Some ISPs delegate a /60 to home users as a smaller alternative to a /56. It is the smallest delegation that still lets you run several separate /64 LANs.

Common use cases

  • Compact home prefix delegation
  • Small deployments needing a few VLANs

Key facts

  • A /60 fixes 60 network bits and leaves 68 host bits — 2⁶⁸ total addresses.
  • In network design terms, /60 is typically a home or small-office prefix delegation.
  • You can subnet a /60 into 2⁴ /64 LANs.
  • Residential ISPs often delegate /56 or /60; /60 would provide 2⁴ home LANs.

Design guidance

A /60 is a common ISP prefix-delegation size for homes and small offices. Configure your edge router to receive the delegated prefix via DHCPv6-PD, then statically route or assign /64 subnets to each internal interface. Even a /60 provides 2⁴ /64 LANs — far more than most households need.

Practical example

Suppose your ISP delegates 2001:db8:abcd:0012::/60 to your edge router. You could assign 2001:db8:abcd:0012::/64 to your main LAN, 2001:db8:abcd:0013::/64 to guest Wi-Fi, and 2001:db8:abcd:0014::/64 to IoT — using only 3 of the 2⁴ available /64 subnets.

Related RFCs and standards

  • RFC 4291IPv6 Addressing Architecture
  • RFC 6177IPv6 Address Assignment to End Sites
  • RFC 3633IPv6 Prefix Options for DHCPv6 Prefix Delegation

Prefix sizing reference

Divide /60 into…

PrefixSubnetsAddresses each
/6122⁶⁷
/6242⁶⁶
/64162⁶⁴
/682562⁶⁰

/60 fits inside…

SupernetAddresses/60s inside
/592⁶⁹2
/582⁷⁰4
/562⁷²16
/522⁷⁶256

Frequently asked questions

Common questions about IPv6 /60 blocks, prefix sizes, and use cases.