SubnetPad

IPv6 /112 Subnet Calculator

Results update as you type

A /112 leaves 16 host bits, giving exactly 65,536 addresses. It is occasionally used for tightly scoped point-to-multipoint links or management networks where a full /64 is unnecessary.

/0
/128

/112 = 2¹⁶ addresses (≈ 6.55 × 10⁴)

Results for 2001:db8:abcd:12::/112

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /112
Total addresses≈ 6.55 × 10⁴ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /112 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /112

IPv6 /112 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (112)Split hextetHost bits (16)
Network bits
112
Host bits
16
Prefix mask
ffff:ffff:ffff:ffff:ffff:ffff:ffff:0
Total addresses
2¹⁶
Approx. count
6.55 × 10⁴
/64 subnets
Addresses formula
2^16
/64 relationship
smaller than a /64

Overview

A /112 leaves 16 host bits, giving exactly 65,536 addresses. It is occasionally used for tightly scoped point-to-multipoint links or management networks where a full /64 is unnecessary.

Common use cases

  • Constrained management segments
  • Lab / documentation examples

Key facts

  • A /112 fixes 112 network bits and leaves 16 host bits — 2¹⁶ total addresses.
  • In network design terms, /112 is typically a constrained management or lab segment.
  • Written out, /112 holds exactly 65,536 addresses.
  • A /112 is 1/2⁴⁸ of a standard /64 LAN subnet.

Design guidance

A /112 can work for small management VLANs, out-of-band networks, or certification lab exercises where you deliberately cap the host count. For router interconnects, prefer /127 (RFC 6164) over /112. For ordinary LANs, stay with /64 regardless of how small the segment feels.

Practical example

In a lab, 2001:db8:abcd:0012::1/112 might number a small segment with 65,536 addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /112 into…

PrefixSubnetsAddresses each
/113232,768
/114416,384
/116164,096
/120256256

/112 fits inside…

SupernetAddresses/112s inside
/1112¹⁷2
/1102¹⁸4
/1082²⁰16
/1042²⁴256

Frequently asked questions

Common questions about IPv6 /112 blocks, prefix sizes, and use cases.