SubnetPad

IPv6 /70 Subnet Calculator

Results update as you type

A /70 is a sub-/64 block covering 1/2⁶ of a standard LAN subnet — 2⁵⁸ addresses. Using prefixes smaller than /64 on a LAN breaks SLAAC and is discouraged except in controlled lab environments.

/0
/128

/70 = 2⁵⁸ addresses (≈ 2.88 × 10¹⁷)

Results for 2001:db8:abcd:12::/70

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /70
Total addresses≈ 2.88 × 10¹⁷ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /70 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /70

IPv6 /70 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (70)Split hextetHost bits (58)
Network bits
70
Host bits
58
Prefix mask
ffff:ffff:ffff:ffff:fc00::
Total addresses
2⁵⁸
Approx. count
2.88 × 10¹⁷
/64 subnets
Addresses formula
2^58
/64 relationship
smaller than a /64

Overview

A /70 is a sub-/64 block covering 1/2⁶ of a standard LAN subnet — 2⁵⁸ addresses. Using prefixes smaller than /64 on a LAN breaks SLAAC and is discouraged except in controlled lab environments.

Common use cases

  • Lab exercises on sub-/64 addressing
  • Documentation of non-standard prefix lengths
  • Controlled environments without SLAAC

Key facts

  • A /70 fixes 70 network bits and leaves 58 host bits — 2⁵⁸ total addresses.
  • In network design terms, /70 is typically a specialized sub-/64 block.
  • A /70 is 1/2⁶ of a standard /64 LAN subnet.

Design guidance

Avoid /70 on production LANs — it breaks SLAAC on most hosts. If you are experimenting in a lab, document why you chose a sub-/64 and ensure all devices support static addressing or DHCPv6. For real networks, assign a full /64 per segment instead of carving 1/2⁶ of one.

Practical example

In a lab, 2001:db8:abcd:0012::1/70 might number a small segment with 2⁵⁸ addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /70 into…

PrefixSubnetsAddresses each
/7122⁵⁷
/7242⁵⁶
/74162⁵⁴
/782562⁵⁰

/70 fits inside…

SupernetAddresses/70s inside
/692⁵⁹2
/682⁶⁰4
/662⁶²16
/622⁶⁶256

Frequently asked questions

Common questions about IPv6 /70 blocks, prefix sizes, and use cases.