SubnetPad

IPv6 /66 Subnet Calculator

Results update as you type

A /66 is a sub-/64 block covering 1/2² of a standard LAN subnet — 2⁶² addresses. Using prefixes smaller than /64 on a LAN breaks SLAAC and is discouraged except in controlled lab environments.

/0
/128

/66 = 2⁶² addresses (≈ 4.61 × 10¹⁸)

Results for 2001:db8:abcd:12::/66

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /66
Total addresses≈ 4.61 × 10¹⁸ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /66 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /66

IPv6 /66 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (66)Split hextetHost bits (62)
Network bits
66
Host bits
62
Prefix mask
ffff:ffff:ffff:ffff:c000::
Total addresses
2⁶²
Approx. count
4.61 × 10¹⁸
/64 subnets
Addresses formula
2^62
/64 relationship
smaller than a /64

Overview

A /66 is a sub-/64 block covering 1/2² of a standard LAN subnet — 2⁶² addresses. Using prefixes smaller than /64 on a LAN breaks SLAAC and is discouraged except in controlled lab environments.

Common use cases

  • Lab exercises on sub-/64 addressing
  • Documentation of non-standard prefix lengths
  • Controlled environments without SLAAC

Key facts

  • A /66 fixes 66 network bits and leaves 62 host bits — 2⁶² total addresses.
  • In network design terms, /66 is typically a specialized sub-/64 block.
  • A /66 is 1/2² of a standard /64 LAN subnet.

Design guidance

Avoid /66 on production LANs — it breaks SLAAC on most hosts. If you are experimenting in a lab, document why you chose a sub-/64 and ensure all devices support static addressing or DHCPv6. For real networks, assign a full /64 per segment instead of carving 1/2² of one.

Practical example

In a lab, 2001:db8:abcd:0012::1/66 might number a small segment with 2⁶² addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /66 into…

PrefixSubnetsAddresses each
/6722⁶¹
/6842⁶⁰
/70162⁵⁸
/742562⁵⁴

/66 fits inside…

SupernetAddresses/66s inside
/652⁶³2
/642⁶⁴4
/622⁶⁶16
/582⁷⁰256

Frequently asked questions

Common questions about IPv6 /66 blocks, prefix sizes, and use cases.