SubnetPad

IPv6 /69 Subnet Calculator

Results update as you type

A /69 is a sub-/64 block covering 1/2⁵ of a standard LAN subnet — 2⁵⁹ addresses. Using prefixes smaller than /64 on a LAN breaks SLAAC and is discouraged except in controlled lab environments.

/0
/128

/69 = 2⁵⁹ addresses (≈ 5.76 × 10¹⁷)

Results for 2001:db8:abcd:12::/69

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /69
Total addresses≈ 5.76 × 10¹⁷ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /69 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /69

IPv6 /69 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (69)Split hextetHost bits (59)
Network bits
69
Host bits
59
Prefix mask
ffff:ffff:ffff:ffff:f800::
Total addresses
2⁵⁹
Approx. count
5.76 × 10¹⁷
/64 subnets
Addresses formula
2^59
/64 relationship
smaller than a /64

Overview

A /69 is a sub-/64 block covering 1/2⁵ of a standard LAN subnet — 2⁵⁹ addresses. Using prefixes smaller than /64 on a LAN breaks SLAAC and is discouraged except in controlled lab environments.

Common use cases

  • Lab exercises on sub-/64 addressing
  • Documentation of non-standard prefix lengths
  • Controlled environments without SLAAC

Key facts

  • A /69 fixes 69 network bits and leaves 59 host bits — 2⁵⁹ total addresses.
  • In network design terms, /69 is typically a specialized sub-/64 block.
  • A /69 is 1/2⁵ of a standard /64 LAN subnet.

Design guidance

Avoid /69 on production LANs — it breaks SLAAC on most hosts. If you are experimenting in a lab, document why you chose a sub-/64 and ensure all devices support static addressing or DHCPv6. For real networks, assign a full /64 per segment instead of carving 1/2⁵ of one.

Practical example

In a lab, 2001:db8:abcd:0012::1/69 might number a small segment with 2⁵⁹ addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /69 into…

PrefixSubnetsAddresses each
/7022⁵⁸
/7142⁵⁷
/73162⁵⁵
/772562⁵¹

/69 fits inside…

SupernetAddresses/69s inside
/682⁶⁰2
/672⁶¹4
/652⁶³16
/612⁶⁷256

Frequently asked questions

Common questions about IPv6 /69 blocks, prefix sizes, and use cases.