SubnetPad

IPv6 /77 Subnet Calculator

Results update as you type

A /77 leaves 51 host bits (2⁵¹ addresses). It is smaller than a /64 LAN and appears in specialized schemes — for example /96 embeds a 32-bit IPv4 address for NAT64 or IPv4-mapped addressing.

/0
/128

/77 = 2⁵¹ addresses (≈ 2.25 × 10¹⁵)

Results for 2001:db8:abcd:12::/77

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /77
Total addresses≈ 2.25 × 10¹⁵ addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /77 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /77

IPv6 /77 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (77)Split hextetHost bits (51)
Network bits
77
Host bits
51
Prefix mask
ffff:ffff:ffff:ffff:fff8::
Total addresses
2⁵¹
Approx. count
2.25 × 10¹⁵
/64 subnets
Addresses formula
2^51
/64 relationship
smaller than a /64

Overview

A /77 leaves 51 host bits (2⁵¹ addresses). It is smaller than a /64 LAN and appears in specialized schemes — for example /96 embeds a 32-bit IPv4 address for NAT64 or IPv4-mapped addressing.

Common use cases

  • NAT64 and IPv4-embedded addressing study
  • Specialized translation gateway design
  • Protocol documentation and examples

Key facts

  • A /77 fixes 77 network bits and leaves 51 host bits — 2⁵¹ total addresses.
  • In network design terms, /77 is typically a specialized sub-/64 block.
  • A /77 is 1/2¹³ of a standard /64 LAN subnet.

Design guidance

A /77 is a specialized size, not a general LAN substitute. Production VLANs should remain /64. Use /77 only when a protocol or design explicitly calls for it — for example /96 in NAT64 translation — or in controlled lab environments.

Practical example

In a lab, 2001:db8:abcd:0012::1/77 might number a small segment with 2⁵¹ addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /77 into…

PrefixSubnetsAddresses each
/7822⁵⁰
/7942⁴⁹
/81162⁴⁷
/852562⁴³

/77 fits inside…

SupernetAddresses/77s inside
/762⁵²2
/752⁵³4
/732⁵⁵16
/692⁵⁹256

Frequently asked questions

Common questions about IPv6 /77 blocks, prefix sizes, and use cases.