SubnetPad

IPv6 /115 Subnet Calculator

Results update as you type

A /115 contains 2¹³ addresses (8,192), suitable for small VLANs, management subnets, or lab scenarios. Standard production LANs should still use /64; this size is for deliberate constraints.

/0
/128

/115 = 2¹³ addresses (≈ 8,192)

Results for 2001:db8:abcd:12::/115

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /115
Total addresses≈ 8,192 addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /115 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /115

IPv6 /115 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (115)Split hextetHost bits (13)
Network bits
115
Host bits
13
Prefix mask
ffff:ffff:ffff:ffff:ffff:ffff:ffff:e000
Total addresses
2¹³
Approx. count
8,192
/64 subnets
Addresses formula
2^13
/64 relationship
smaller than a /64

Overview

A /115 contains 2¹³ addresses (8,192), suitable for small VLANs, management subnets, or lab scenarios. Standard production LANs should still use /64; this size is for deliberate constraints.

Common use cases

  • Small management VLANs
  • Test and staging environments
  • Subnetting practice for certification exams

Key facts

  • A /115 fixes 115 network bits and leaves 13 host bits — 2¹³ total addresses.
  • In network design terms, /115 is typically a constrained management or lab segment.
  • Written out, /115 holds exactly 8,192 addresses.
  • A /115 is 1/2⁵¹ of a standard /64 LAN subnet.

Design guidance

A /115 can work for small management VLANs, out-of-band networks, or certification lab exercises where you deliberately cap the host count. For router interconnects, prefer /127 (RFC 6164) over /115. For ordinary LANs, stay with /64 regardless of how small the segment feels.

Practical example

In a lab, 2001:db8:abcd:0012::1/115 might number a small segment with 8,192 addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /115 into…

PrefixSubnetsAddresses each
/11624,096
/11742,048
/11916512
/12325632

/115 fits inside…

SupernetAddresses/115s inside
/1142¹⁴2
/1132¹⁵4
/1112¹⁷16
/1072²¹256

Frequently asked questions

Common questions about IPv6 /115 blocks, prefix sizes, and use cases.