SubnetPad

IPv6 /87 Subnet Calculator

Results update as you type

A /87 leaves 41 host bits (2⁴¹ addresses). It is smaller than a /64 LAN and appears in specialized schemes — for example /96 embeds a 32-bit IPv4 address for NAT64 or IPv4-mapped addressing.

/0
/128

/87 = 2⁴¹ addresses (≈ 2.20 × 10¹²)

Results for 2001:db8:abcd:12::/87

Documentation (RFC 3849)Global scope
Network / prefixThe first address — identifies the subnet itself
First addressSubnet-router anycast; first address in the block
Last addressThe highest address in this block
Prefix maskEquivalent to /87
Total addresses≈ 2.20 × 10¹² addresses
Address typeGlobally routable scope
More detailsNeighboring subnets, expanded address, reverse DNS, and hextet breakdown

Neighboring /87 subnets

Expanded address
Compressed address
Network (expanded)
Last address (expanded)
Prefix mask
Total addresses (exact)
Reverse DNS (PTR)
Host bits / network bits

Hextet breakdown

20010db8abcd00120000000000000001
NetworkSplit groupHost

Quick facts for IPv6 /87

IPv6 /87 reference guideBit split, overview, key facts, sizing tables, design notes, standards, and FAQ

Network / host bit split

Network bits (87)Split hextetHost bits (41)
Network bits
87
Host bits
41
Prefix mask
ffff:ffff:ffff:ffff:ffff:fe00::
Total addresses
2⁴¹
Approx. count
2.20 × 10¹²
/64 subnets
Addresses formula
2^41
/64 relationship
smaller than a /64

Overview

A /87 leaves 41 host bits (2⁴¹ addresses). It is smaller than a /64 LAN and appears in specialized schemes — for example /96 embeds a 32-bit IPv4 address for NAT64 or IPv4-mapped addressing.

Common use cases

  • NAT64 and IPv4-embedded addressing study
  • Specialized translation gateway design
  • Protocol documentation and examples

Key facts

  • A /87 fixes 87 network bits and leaves 41 host bits — 2⁴¹ total addresses.
  • In network design terms, /87 is typically a specialized sub-/64 block.
  • A /87 is 1/2²³ of a standard /64 LAN subnet.

Design guidance

A /87 is a specialized size, not a general LAN substitute. Production VLANs should remain /64. Use /87 only when a protocol or design explicitly calls for it — for example /96 in NAT64 translation — or in controlled lab environments.

Practical example

In a lab, 2001:db8:abcd:0012::1/87 might number a small segment with 2⁴¹ addresses. In production, you would normally expand this to a full /64 unless you have a documented exception.

Prefix sizing reference

Divide /87 into…

PrefixSubnetsAddresses each
/8822⁴⁰
/8942³⁹
/91162³⁷
/952562³³

/87 fits inside…

SupernetAddresses/87s inside
/862⁴²2
/852⁴³4
/832⁴⁵16
/792⁴⁹256

Frequently asked questions

Common questions about IPv6 /87 blocks, prefix sizes, and use cases.